The day has arrived when you have to think about how to build solar panels in your own home to save energy bills and therefore precious money and do your little bit for saving the environment.

The advantage of this experiment is to learn about something first-hand what one has only read about. This way you will know what it is for yourself. And your entire family can participate too! To begin, head out to the hardware department.

To begin with, clean your hands and wipe dry. Cut the copper sheeting to the diameter of the stove. Then, clean the copper sheet using soap to take away oil that might have accumulated on it. Wipe the sheet well with the sand paper.

First thing, wash hands to keep clean and dry. Cut a piece of the copper sheeting to the size of the diameter of the electric stove. Now, wash copper sheet with soap to rid it of any oil. With sand paper, clean the sheet really well.

Meanwhile, get the stove started and raise temperature to high. Place the copper sheet on top of it. You will see the sheet changing colors from orange to purple to red and then pink; once it heats further, the colors will go and now the sheet will go dark. Roast the sheet for about half hour.

As soon as it cools down entirely, it should be held under a tap of running water to allow the flakes to fall off. This has to be done with ease and a gentle touch so as not to hurt the SOLAR PANEL.

You will now need another sheet of copper around the same dimensions as the first. Fit them into the bottle without letting them touch each other. The side of the sheet facing up on the stove should face out into the bottle.

Now, attach your clip leads, one to the new copper plate, and one to the COOKED one. The clean sheet should be attached to the positive side of the meter and the cooked one to the negative.

Now, attach the leads. The second sheet should be wired to the positive area of the meter and the first one must be clipped to the negative one. In hot water, put in a good number of tablespoons of salt and mix thoroughly. This concoction has to be poured into the bottle ensuring that the sheets are not submerged up to an inch from top. This is your home manufactured solar panel!

To think it would light up bulbs and other electrical appliances would be foolish. This power box can produce only 50 micro amps at 0.25 volts. One will need hundreds of these to power an entire home which would be a major expenditure.

Did you know you can slash your energy bill in half? The Green DIY Energy guide shows you step-by-step how to build your own solar panel system for less than $200! Grab a FREE PEEK INSIDE the Green DIY Energy Guide now! Click here to get your own unique version of this article with free reprint rights.